A Setup for Testing of Silicon Pixel Modules for the ITk Tracker in the ATLAS Experiment at CERN

dc.contributor.author	Leung, Wai Chun
dc.date.accessioned	2021-06-30T23:56:09Z
dc.date.available	2021-06-30T23:56:09Z
dc.date.issued	2021-06-14
dc.date.submitted	2021-06-30T22:00:48Z
dc.identifier.uri	https://hdl.handle.net/11250/2762658
dc.description.abstract	New pixel sensors will be installed to the new Inner Tracker upgrade at the ATLAS detector. These sensor will have higher radiation tolerance than the ones currently on the Inner Detector. This thesis will concentrate on development of a test setup dedicated to testing the new pixel sensors. The Peltier Controller Temperature Monitor has been developed for this purpose. IV-curve measurements have also been done on RD53A sensor modules. The Peltier Controller Temperature Monitor has been successfully used in stage 1 qualification test of module testing in the University of Bergen. The Peltier Controller has also been proven to work quite well.
dc.language.iso	eng
dc.publisher	The University of Bergen
dc.rights	Copyright the Author. All rights reserved
dc.subject	Test Setup
dc.subject	CERN
dc.subject	Silicon Pixel Module
dc.subject	ITk
dc.subject	ATLAS
dc.title	A Setup for Testing of Silicon Pixel Modules for the ITk Tracker in the ATLAS Experiment at CERN
dc.type	Master thesis
dc.date.updated	2021-06-30T22:00:48Z
dc.rights.holder	Copyright the Author. All rights reserved
dc.description.degree	Masteroppgave i fysikk
dc.description.localcode	PHYS399
dc.description.localcode	MAMN-PHYS
dc.subject.nus	752199
fs.subjectcode	PHYS399
fs.unitcode	12-24-0